Compact Mini Model Dual‑Shaft Industrial Shredder for Small Recycling

Our industrial shredders feature heavy‑duty frame and durable cutting blades, reducing material volume through shearing, tearing and extrusion. Suitable for plastics, rubber, wood, metal scraps, e‑waste and various industrial solid waste. Equipped with intelligent overload protection system for stable operation and easy maintenance. Different models are available to match your requirements on throughput, feed size and output particle size, widely used in waste recycling and material reprocessing to deliver reliable size‑reduction solutions.

Inquire Now Contact Us

Detailed Description

Motor	1.5kW × 1
Voltage	Customizable
Reducer	K57 × 1
Main Shaft	45×560mm × 2
Blade	100×10mm × 12 (Thickness customizable)
Blade Material	Alloy tool steel
Shredder Box	120×200mm
Dimension	650×380×880mm

This small dual‑shaft shredder is specially designed for small‑capacity waste size reduction. It is widely applicable for small recycling workshops, factory in‑house waste disposal, laboratory sample processing and pilot test projects.

Related Selection Resources

Send Inquiry

Accessories & Supporting Components

Shredder Chamber & Cutting Box

The shredder chamber is the core working unit of every double-shaft shredder. Fabricated from thick welded steel plate, it houses the cutter shafts, spacers and fixed counter knives. Removable side panels simplify cutter replacement and internal cleaning. Chamber geometry, cutter thickness and clearances directly define the final particle size and output consistency.

Drive Motor

Shredder drive motors must withstand shock loads, frequent forward-reverse rotation and sustained operation under material jams. We specify cast-iron housing, heat-resistant windings and overload protection. Standard high-efficiency and VFD-compatible variable-frequency models are available to match the control system and power supply.

Hard-Tooth Reducer / Gearbox

Carburized and quenched hard-tooth reducers deliver the low-speed, high-torque shear required for shredding. The gearbox absorbs instantaneous torque shocks from contaminated material and supports reliable forward-reverse cycling. Available in K-series and ZQ-series housings sized to the motor and cutting load.

Tags:

Key Features

Compact Installation Footprint

A 650 × 380 mm footprint for sites where installation space matters.

Small-Batch Processing

A 120 × 200 mm cutting chamber for laboratory trials and small-batch size reduction.

Matched Drive Configuration

Listed with a 1.5 kW motor and K57 reducer.

Application-Based Customization

Customizable cutter thickness and voltage to match agreed processing and electrical requirements.

Applications & Use Cases

Plastic Recycling

Shreds HDPE, LDPE, PET bottles, films, crates and mixed plastic scrap for washing, granulation or energy recovery.

Learn more →

Tire Recycling

Reduces whole and scrap tires into 30 – 50 mm chips for rubber mulch, pyrolysis or downstream granulation.

Learn more →

Industrial Waste Processing

Mixed factory waste, cardboard, wood pallets, packaging material and light scrap — one shredder handles the lot.

Learn more →

E-Waste Recycling

PCB boards, cables, small appliances and electronic scrap — reliable shredding before copper recovery or disposal.

Learn more →

Metal Scrap Processing

Light-gauge sheet metal, stamping offcuts and mixed scrap — reduces volume and separates contaminants for downstream sorting.

Learn more →

Frequently Asked Questions

Q Is a mini double-shaft shredder suitable for my laboratory samples?

Suitability depends on sample dimensions, material toughness, contamination and the required output. Provide representative samples and explain the next processing step. Compact machine dimensions alone do not establish suitability for every laboratory material.

Q What is the throughput of this mini shredder?

A reliable throughput figure requires a material-specific test. Record sample weight, total processing time, feeding interruptions and acceptable output. Results from clean rigid plastic should not be applied directly to film, rubber or mixed waste.

Q Will 10 mm cutters produce uniform 10 mm particles?

No. Cutter width influences the cut, but particle length and shape also depend on material behavior and cutter geometry. If a tightly controlled size is required, assess screening or secondary granulation.

Q What should I check when processing different sample materials?

Assess cleaning access, retained material and cross-contamination requirements before ordering. For sensitive sample preparation, agree on a cleaning verification method. Machine suitability includes how reliably one sample can be cleared before the next.